DPM/L

DPM/L

Disinfectant for food and zootechnic industry systems

016DPM/TN20

A non-foaming chlorine disinfectant and detergent formulated for the cleaning and disinfecting of equipment and utensils in zootechnic industry systems. It instantly dissolves in water and, if diluted as indicated, does not damage the surfaces with which it comes into contact. The alkaline salts are capable of removing all residue of an organic nature. The strongly oxidising chlorine agent (3.7%) disinfects and leaves treated surfaces shining. Can be used both in CIP systems and for the manual washing of all equipment. The sequstrant additives contained in the product improve the effectiveness of the detergent, preventing the salts responsible for water hardness from becoming lime scale residue.

At least once a week, carry out descaling operation with one of the following products: CIP DISINCROSTANTE, DM7, DM7 SUPER (consult the information sheets). Keep the container far from frost, sources of heat, and direct light. Do not mix with acids.

WASHING OF CIP SYSTEMS: Rinse with mains water Allow a 0.5% - 1.0% solution to circulate (with water at 30-50°C) After 10’ - 15’ drain and rinse with potable water. MANUAL CLEANING OF TANKS - ACCESSORIES AND INSTRUMENTS: Rinse with mains water wipe with a sponge or brush using a 1% - 1.5% solution Rinse with drinking water.

Carton with 4 cans of 5L - 016DPM/0020
Can of 20L - 016DPM/TN20
Canister of 200L - 016DPM/0200
Cistern of 1000L - 016DPM/1000

Search the Site A product or information